manualshive.com logo in svg

Ricoh Aficio SP C231, Service Manual, Page: 107 / 247

Share
Download
Ricoh Aficio SP C231 Service Manual Download Page 107

INSTALLATION PROCEDURE

3-15

SM

C231

Inst

allat

ion

Installation Procedure
- For C231 -

1.  Turn off the main switch and unplug the power cord.

2.  Remove the paper delivery table (2 screws).

3.  Remove the paper delivery plate (4 screws).

4.  Cut the cap [A] off the rear cover with pliers.

5.  Remove the small cap in the rear cover of the main body. Then, connect the

tape marker harness to the main body, and install the connector cover using
one of the rear cover securing screws.

6.  Install the tape marker on the main body with two knob screws [B]

(accessories) in the two outside holes of the tape marker bracket. Install the
lock washer [C] (accessory) with the lower of the two knob screws.

7.  Reinstall the paper delivery plate and paper delivery table.

C231I536.WMF

C231I533.WMF

[C]

[B]

[A]

Summary of Contents for Aficio SP C231
























































































































































































































































Reviews:

No comments