ii
R
CAUTION:
•
Protect the machine from dampness or wet weather, such as rain and snow.
•
Contact your service representative if you need to lift the machine (such as
when relocating it to another floor). Do not attempt to lift the machine without
the assistance of your service representative. The machine will be damaged
if it topples or is dropped, resulting in malfunction and risk of injury to users.
The machine's various handling areas are for service engineer use only. Do
not touch these areas.
•
Unplug the power cord from the wall outlet before you move the machine.
•
While moving the machine, you should take care that the power cord will not
be damaged under the machine.
•
When you disconnect the power plug from the wall outlet, always pull the
plug (not the cable).
•
Do not allow paper clips, staples, or other small metallic objects to fall inside
the machine.
•
For environmental reasons, do not dispose of the machine or expended
supply waste at household waste collection points. Disposal can take place
at an authorized dealer.
•
Keep the machine away from humidity and dust. Otherwise a fire or an electric
shock might occur.
•
Do not place the machine on an unstable or tilted surface. If it topples over,
an injury might occur.
•
Do not use reuse stapled paper. Do not use aluminum foil, carbon-containing
paper or other conductive paper. Otherwise,a fire might occur.
•
Make sure the room where you are using the machine is well ventilated and
spacious. Good ventilation is especially important when the machine is used
heavily.
•
When loading paper, take care not to trap or injure your fingers.
•
Fire and breakdown can result from heavy accumulation of dust inside this
machine. Consult your service representative for details about and charges
for cleaning the machine’s interior.
•
Keep your hands clear of the Folding Finisher and Paper Exit. You can trap
your fingers if you do not.
Summary of Contents for Aficio MP W2400
