manualshive.com logo in svg

Ricoh Aficio MP W2400, Operating Instructions Manual

Share
Download
Ricoh Aficio MP W2400 Operating Instructions Manual Download Page 16

Preparation Before Using the Folding Finisher

8

1

Turning the Folding Finisher Off 

This section explains how to turn off the Folding Finisher.

A

Turn off the power switch of the printer.

B

Turn the power switch of the Folding Finisher to “

c

 Stand by”.

Note

❒

Turning the Folding Finisher off before turning off the printer causes an
alarm. If the alarm sounds, turn the Folding Finisher back on, and then
turn off the printer and Folding Finisher in the correct order.

Operating the Drying Heater Switch

 When there is rapid temperature change, such as in winter, or high temperature
and humidity, such as in the rainy season, paper absorbs moisture and wrinkles.
A Drying Heater is included in the Folding Finisher to prevent such conditions
from occuring. When humidity is high and paper is wrinkled, turn this switch
to “

a

On”. Turn this switch to “

b

 Off” when not required. If the Drying Heater

switch is turned to “

a

On”, the Drying Heater operates, even after the power

switch is turned off.

Reference

 p.12 “Paper” 

ATR003S

ATR207S

Summary of Contents for Aficio MP W2400























































Reviews:

No comments

Brands by name

Popular brands

Load more brands