background image

Fan Fold

17

2

Fan Fold 

The Folding Finisher folds paper, repeating folding operations in the order of
mountain fold, valley fold, mountain fold.
Two types of fan fold are available: 

Fan fold

Fan-folds paper into a fan shape with all surfaces the same width. You can select the
folding width from 140 mm (5.6 inches), 170 mm (6.7 inches), 210 mm (8.3 inches),
or 297 mm (11.7 inches).

Fan fold (Margin Fold)

Creates a margin by changing the folding widths of the first surface and the surfaces
that follow. The first surface is folded with a width of 210 mm (8.3 inches) and the
following surfaces with 170 mm (6.7 inches).

Note

For paper that can be folded with Fan fold, see “Supported Paper Types and Sizes”.

Reference

 p.12 “Supported Paper Types and Sizes” 

Fan Fold Type List

When folding paper with Fan fold, select the type using Fold Type No. This sec-
tion explains the different types of Fan fold.

Fold type no.

Fold type

Title block position

1

Fan Fold 140 mm (5.6 inches)

Rear edge

2

Fan Fold 170 mm (6.7 inches)

Rear edge

3

Fan Fold 210 mm (8.3 inches)

Rear edge

4

Fan Fold 297 mm (11.7 inches)

Rear edge

5

Fan Fold 210 mm (8.3 inches)/Margin 
Fold

Rear edge

Summary of Contents for Aficio MP W2400























































Reviews: