manualshive.com logo in svg

Ricoh Aficio MP C2030, Security Reference

Share
Download
Ricoh Aficio MP C2030 Security Reference Download Page 44

If you select [Simple (Limitation)], proceed to "Selecting Simple (Limitation)".

• p.117 "Limiting Available Functions"
• p.42 "Selecting Entire or Simple (All)"
• p.43 "Selecting Simple (Limitation)"
• p.87 "Printer Job Authentication"

Selecting Entire or Simple (All)

If you select [Entire], you cannot print using a printer driver or a device that does not support authentication.
To print under an environment that does not support authentication, select [Simple (All)] or [Simple
(Limitation)].
If you select [Simple (All)], you can print even with unauthenticated printer drivers or devices. Specify this
setting if you want to print with a printer driver or device that cannot be identified by the machine or if you
do not require authentication for printing. However, note that, because the machine does not require
authentication in this case, it may be used by unauthorized users.

1.

Select [Entire] or [Simple (All)] using [ ] or [ ], and then press the [OK] key.

2.

Press [Exit].

3.

Press the [OK] key.

4.

Press the [User Tools/Counter] key.

3. Users/Authentication and Its Application

42

3

Summary of Contents for Aficio MP C2030





























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands