Ricoh Aficio MP 201F, Service Manual

Page: 425 / 542

Fax Error Codes
SM Appendix 4-21 D115/D116
Appe
ndix:
Fax T
rou
ble--
shooting
Guide
22-00
Original length exceeded
the maximum scan length
ƒ
Divide the original into more than one page.
ƒ
Check the resolution used for scanning. Lower
the scan resolution if possible.
ƒ
Add optional page memory.
22-01
Memory overflow while
receiving
ƒ
Wait for the files in the queue to be sent.
ƒ
Delete unnecessary files from memory.
ƒ
Transfer the substitute reception files to an
another fax machine, if the machine’s printer is
busy or out of order.
ƒ
Add an optional SAF memory card or hard
disk.
22-02
Tx or rx job stalled due to
line disconnection at the
other end
ƒ
The job started normally but did not finish
normally; data may or may not have been
received fully.
ƒ
Restart the machine.
22-04
The machine cannot store
received data in the SAF
ƒ
Update the ROM
ƒ
Replace the FCU.
22-05
No G3 parameter
confirmation answer
ƒ
Defective FCU board or firmware.
23-00
Data read timeout during
construction
ƒ
Restart the machine.
ƒ
Replace the FCU.
25-00
The machine software
resets itself after a fatal
transmission error
occurred
ƒ
Update the ROM
ƒ
Replace the FCU.
F0-xx V.34 modem error
ƒ
Replace the FCU.
F6-xx SG3 modem error
ƒ
Update the SG3 modem ROM.
ƒ
Replace the SG3 board.
ƒ
Check for line noise or other line problems.
ƒ
Try communicating another V.8/V.34 fax.