manualshive.com logo in svg

Ricoh Aficio MP 201F, Service Manual

Share
Download
Ricoh Aficio MP 201F Service Manual Download Page 175

Using SP Mode 

SM 5-9 

D115/D116 

Syste

m

 

Ma

in

te

na

n

ce 

Ref

eren

ce

 

 

ƒ

 Do 

NOT

 press the “Verify” key. 

9.  The firmware update program starts and the message "Loading" is displayed. 

ƒ

 

The update will begin, and then will take a few minutes to complete. The LCD will 

initially display, “Updating…        ***---------“. 

ƒ

 

When the update is completed, the LCD display will change to “Update done” or 

“Updated / Power Off On”. 

 

10.  Check that the message "Update Done" is displayed. 

-Confirmation-

 

1.  Turn the main power switch off and on. 

ƒ

 

The LCD will display “Please wait…” for about 60 seconds, after which it will return to 

the “Program UpDate Menu” screen. 

2.  Repeat Steps 1-8 above until all firmware updates are complete. 

3.  Turn the main power switch off. 

4.  Remove the SD card from the lower slot on the controller by pushing on the card to release 

the spring lock. 

 

If an error occurs, the error code is displayed. For a list of information on error codes, see the 

following table. 

Summary of Contents for Aficio MP 201F































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands