manualshive.com logo in svg

Ricoh Aficio MP 171, Operating Instructions Manual

Share
Download
Ricoh Aficio MP 171 Operating Instructions Manual Download Page 227

8.

Select the printer model you want to use.

The printer name can be changed in the [Change settings for 'Printer Name'] box.

9.

Double-click the printer name to display the printer settings.

The details shown in [Comment], [Driver], and [Port] vary depending on the operating system, printer
model, and port.

10.

Click [Port], and then click [Add].

11.

Click [SmartDeviceMonitor], and then click [OK].

12.

Click [IPP].

13.

In the [Printer URL] box, enter "http://printer's IP address/printer" as the printer's address.

If the server authentication is issued, to enable SSL (a protocol for encrypted communication), enter
"https://printer's IP address/printer" (Internet Explorer 5.01, or a higher version must be installed).
(example IP address: 192.168.15.16)

http://192.168.15.16/printer
https://192.168.15.16/printer

You can enter "http://printer's IP address/ipp" as the printer's address.

14.

Enter a name for identifying the printer in [IPP Port Name]. Use a name different from the
one of any existing ports.

If a name is not specified here, the address entered in the [Printer URL] box becomes the IPP port
name.

15.

Click [Detailed Settings] to make necessary settings.

For details about the settings, see SmartDeviceMonitor for Client Help.

16.

Click [OK].

17.

Check that the port of the selected printer is displayed in [Port].

18.

Set a user code, if necessary.

Up to 8 numeric characters can be entered. No alphabetic characters or symbols can be entered.

19.

Select the [Default Printer] check box to configure the printer as default.

20.

Click [Continue].

Installation starts.

21.

After the installation is completed, select one of the options to restart the computer either
now or later, and then click [Finish].

Restart the computer to complete installation.

• To stop installation of the selected software, click [Cancel] before installation is complete.
• Auto Run may not work with certain operating system settings. In that case, launch "Setup.exe" on the

CD-ROM root directory.

1. Preparing the Machine

18

1

Summary of Contents for Aficio MP 171





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands