Ricoh Aficio MP 1100 Operating Instructions Manual Download Page 66

Page: 66 / 297

System Settings

IEEE 1394

This section describes various items of

[

IEEE 1394

]

under

[

Interface Settings

]

[

IEEE 1394

]

is displayed when this machine is installed with the IEEE 1394 inter-

face board (optional).

❖

IPv4 Address

When you connect the machine to a network using the IEEE 1394 interface,
you must configure the IP address and subnet mask.
When you select

[

Specify

]

, enter the

[

Machine IPv4 Address

]

and

[

Sub-net Mask

]

as “xxx.xxx.xxx.xxx”(“x” indicates a number).
When you use the IEEE 1394 interface on a network, you cannot use the Ether-
net interface in the same domain. To use both interfaces in the same domain,
set different values for the

[

Sub-net Mask

]

If you use the interface for Ethernet and IEEE 1394 (IP over 1394) at the same
time, settings must be made carefully.
•

Auto-Obtain (DHCP)

• Specify

• Machine IPv4 Address: 000.000.000.000
• Sub-net Mask: 000.000.000.000

❖

DDNS Configuration

You can specify the DDNS settings.
•

Active

• Inactive

❖

Host Name

Specify the host name.
Enter the host name using up to 63 alphanumerical characters.

❖

Domain Name

Make settings for the domain name.
•

Auto-Obtain (DHCP)

• Specify

Enter the domain name using up to 63 alphanumerical characters.

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for Aficio MP 1100










































































































































































































































































































Search results

Summary of Contents for Aficio MP 1100

Reviews:

Related manuals for Aficio MP 1100

Brands by name

Popular brands

Ricoh Aficio MP 1100, Operating Instructions Manual

Search results

Summary of Contents for Aficio MP 1100

Reviews:

Related manuals for Aficio MP 1100

Brands by name

Popular brands