Ricoh Aficio IS330DC, Operating Instructions Manual

Page: 35 / 48

Cleaning
21
3
Cleaning
R
WARNING:
R
CAUTION:
We recommend periodically cleaning
the scanner to ensure that it is in opti-
mum operating condition. First, wipe
off the scanner with a dry, soft cloth.
Next, dampen a soft cloth with water,
wring it out tightly, and then wipe off
the scanner. Use a neutral detergent
for exterior portions of the scanner
where soiling cannot be removed
with water alone. Wipe off the rubber
rollers with ethyl alcohol, and then
wipe with a cloth dampened with wa-
ter. Finally, wipe off the rollers and
exterior with a dry cloth to remove
any excess moisture.
Important
❒
Do not use volatile chemicals such
as benzene, paint thinner or spray
with insecticides. This can cause
deformation, discoloration and
cracking.
❒
Wipe off the Automatic Document
Feeder (ADF) with a dry, clean
cloth when there is dust or soiling
present inside.
Cleaning the Contact Glass,
ADF Contact Glass, White
Sheet, and White Plate
R
CAUTION:
A
Turn off the power of the scanner
and unplug the power cord from
the outlet.
B
Wipe off the scanner with a dry,
soft cloth.
1.
White Plate
2.
White Sheet
3.
ADF Contact Glass
4.
Contact Glass
• Never remove any covers or screws other
than those specified in this manual. The
inside of the scanner contains high-volt-
age components that can cause electrical
shock. Have all inspections, adjustments,
and repairs inside the scanner performed
by an authorized dealer only.
• Do not attempt to modify this scanner in
any way. Modification can cause fire or
electrical shock.
• When disconnecting the power cord, al-
ways make sure to hold onto the plug. Do
not pull on the power cord itself. This can
cause damage to the cord, fire or electrical
shock.
• Be careful not to pinch your fingers when
closing the Automatic Document Feeder
(ADF).
ZDLH060E
1
2
3
4