manualshive.com logo in svg

Ricoh Aficio 3260C, Operating Instructions Manual

Share
Download
Ricoh Aficio 3260C Operating Instructions Manual Download Page 159

Toner

147

6

Toner

Handling Toner

R

 

WARNING:

R

 

CAUTION:

Important

❒

If you use toner other than the recommended type, an error might occur.

Reference

To add toner, see p.110 “

D

 Adding Toner”.

Toner Storage

When storing toner, the following precautions should always be followed:
• Store toner containers in a cool, dry place free from direct sunlight.
• Store on a flat surface.
• Store toner containers laid down.

Used Toner

Note

❒

Toner cannot be re-used.

•

Do not incinerate used toner or toner containers. Toner dust might ig-
nite when exposed to an open flame. Dispose of used toner containers 
in accordance with local regulations.

•

Keep toner (used or unused) and toner containers out of reach of children.

VenusC1_GB_zen_Pre_FM.book  Page 147  Wednesday, March 23, 2005  2:07 PM

Summary of Contents for Aficio 3260C















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands