Ricoh Aficio 3224C Operating Instructions Manual Download Page 39

Page: 39 / 228

Printing the Journal

Journal

Printing date

Shows the date and time when the report
is printed.

Programmed Fax Header

Shows the sender name programmed for
printing.

Date

Shows the transmission or reception
date.

Time

Shows the transmission or reception start
time.

Other end

❖

For fax destinations

• Shows the name (for display) pro-

grammed by the other end.

• Shows the programmed fax num-

ber if the name (for display) has not
been programmed.

• If neither name nor fax number has

been programmed by the other
end, an entered fax number or a
name programmed in a destination
list is shown for transmissions.

• The space will be blank for recep-

tions.

Note

❒

To prioritize a fax number or name
programmed in the destination
list, contact your service represen-
tative.

ADJ102S

ThemisC1_Fax_EN-F_FM.book Page 29 Tuesday, January 11, 2005 4:59 PM

Summary of Contents for Aficio 3224C





































































































































































































































Search results

Summary of Contents for Aficio 3224C

Reviews:

Brands by name

Popular brands

Ricoh Aficio 3224C, Operating Instructions Manual

Search results

Summary of Contents for Aficio 3224C

Reviews:

Brands by name

Popular brands