manualshive.com logo in svg

Ricoh Aficio 3224C, Operating Instructions Manual

Share
Download
Ricoh Aficio 3224C Operating Instructions Manual Download Page 24

Transmission Mode

14

1

Polling Reception

Use this function to poll a message
from another terminal. You can also
poll documents from many terminals
with only one operation (use Groups
and Keystroke Programs to fully ex-
ploit this function).

Preparation

Before using ID Polling Transmis-
sion, you must register a polling
ID. See p.190 “Programming a
Polling ID”.

There are two types of Polling Recep-
tion.

❖

❖

❖

❖

Default ID/Free Polling Reception

Use this method for Free Polling or
Default ID Polling. If the Polling ID
is programmed in your machine,
any messages waiting in the trans-
mitting machine with the same ID
are received. If the other machine
does not have any messages wait-
ing with the same Polling ID, any
messages that do not require ID
are received (Free Polling).

❖

❖

❖

❖

ID Override Polling Reception

You must enter an Override Poll-
ing ID unique to this transmission.
This ID overrides the one stored in
this machine.
Your machine will receive any
messages waiting in the transmit-
ting machine that have matching
ID's. If no ID's match, any messag-
es that do not require IDs are re-
ceived (Free Polling).

Limitation

❒

Polling Reception requires that the
other machine is capable of Polling
Transmission.

❒

Usually, you can only receive doc-
uments with a Polling ID from ma-
chines of the same manufacturer
that support the polling function.
However, if the other party's fax
machine supports Polling Trans-
missions and the SEP function, and
also has stored IDs, you can still
perform Polling Reception. See
p.50 “SEP Code”.

❒

This function is not available with
Internet Fax.

ThemisC1_Fax_EN-F_FM.book  Page 14  Tuesday, January 11, 2005  4:59 PM

Summary of Contents for Aficio 3224C





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands