Basics
6
1
Recommended Originals
• You can set originals with weight in the range 21g/m
2
of(6 lb) to 157 g/m
2
(41
lb).
• You can set original with sizes between 914
×
3,000mm (W
×
L), 36"
×
118" and
210
×
297mm (W
×
L), 8.5"
×
11". (The maximum width that can be fed is 960mm,
38.4")
• You can not use the Repeated Copying function in the following cases:
When using the Carrier Sheet.
When setting an original longer than 1,200mm (48").
• Fix the curl of originals to within the following range:
• For the curl of the leading edge and the trailing edge: R50mm (2.0") or
more, H20mm (0.8") or less.
• For the curl of the whole paper:
φ
30mm (1.2") or more
• When you copy the following originals, set them in the rear table:
⇒
P.19 “Using the Rear Table”
• Thick originals (0.19mm ~1mm)
• Originals less than 297mm (11") in width and more than 1,200mm (48") in
length.
• When you copy the following originals, use the carrier sheet to set them:
• Piled originals
• Folded originals
• Taped or pasted originals
• Originals which have a hole near the leading edge 40mm (1.6") to the right
or left of the center
• Dog-eared originals
• Creased, torn, or clipped-out originals
• Wavy originals
• Pasted originals
• Originals whose leading edge is not straight
Summary of Contents for 7700W
