Rico MD-BSW280, User Manual

Page: 18 / 34

18
Note: Prevent damage the touch or TFT displayer, Can not use sharp objects
chick displayer.
Figure 1 Panel diagram
2. Operation
1. Operate light with touch or encoder button

The left area is TFT Displayer and touch, chick item or value with finger
will to complete operation of set light setting(parameters) or view light
state.

The area on the right hand side is rotary encoder with button, As auxiliary
input interface, if disable touch function,, the encoder can been choose
to set or view the item, and then press the encoder button to confirm the
selection, rotary encoder again set the parameter value, finally, Press
encoder button one again to save value or setting.
2. Parameter value setting
When the selected item is value need to been modified, the dialog shown in