Page I-3
Revised: 9/1/2021
Last Edited by: FR
APX 1000+ Assembly Manual
Tools needed:
#2 Phillips Screwdriver
#3 Phillips Screwdriver
½” Wrench
7/16” Wrench
10mm Wrench
Tape Measure
Drill with ¼” (7mm) drill bit*
Blanket or another soft surface to work on
*May only be required if mounting GTpro3 Pedals
Required Assembly Time
Plan your time wisely. These are assembly time estimates based on the average novice builder. These times are for
assembly of the chassis and mounting the peripherals only. Connecting components, configuring your system and cable
management will require additional time.
APX-1000: about 4 hours
APX-2000: about 5 hours
APX-3000: about 6 hours
APX-3000UW: about 7 hours
Slip-Sense Add-On: about 3 additional hours
Pay particular attention to comments marked with the symbol.
Please call us if you have any problems during the assembly process, even if it is
after hours. You can press 1 when prompted and leave a voicemail after hours and
a technician will be attempted to be reached to return your call. We understand
