CARE and MAINTENANCE:
When the microscope is not in use, turn the power switch off. When not charging the microscope, unplug it.
Use a piece of silk or absorbant cotton soaked with microscope cleaning solution to clean the body of the microscope.
Cover the microscope with a dust cover with not in use.
Use a blower or lens tissue to clean the objective lenses.
Clean the microscope surface with a soft cloth and for tough stains use a neutral detergent. Do NOT use solvents such as
alcohol or ether as this may damage the paint on the body of the microscope.
Store the microscope in a cool and dry place to keep mildew from building on the lenses or moving parts.
BULB REPLACEMENT:
Turn off the microscope and unplug it.
Unscrew the 3 rubber feet from the base
to remove the base plate.
Remove the LED lamp and replace it with
part # MDS1-001.
Screw the base plate back on with
the rubber feet.
Page 6
Remove Screws
