52
2. Plot setting:
1. Click „Setup‟in the plotcneter dialog:
2.
Click „Plot setting‟ to get the following dialog:
Rotating 90 degree: change the plotting direction
Use Vector font: use to make the font width same as the original
Setup line width: set the plotting line width
Paper width: set the maximum plotting width, if the marker width is wider than the paper width, the marker
will be split to several parts and plot out.
Border and Space:
Right space: the space between the start plotting position and origin
Plot space: the margin between two markers
Mark space: the joint mark when the marker is split to several parts
3. Plotter setup
1. Click „Setup‟ in the plotcenter dialog.
