28
2. Put two square bars through the two sides of cloth, put one piece of bar in notch that on the support,
and put another bar in the bar seat behind the beam.
1.6 Connect to computer
1. connect plotter to the computer by LAN cable
the plotter is using the LAN cable port and USB port
，
you can connect the LAN cable to the computer
or to the router, the LAN cable must be twist-pair.
If the plotter connects to the router, the cable should be straight-through, made as follows:
One side: white-orange/orange/white-green/blue/white-blue/green/white-brown/brown
The other side: white-orange/orange/white-green/blue/white-blue/green/white-brown/brown
Butterfly screw
support
Bar seat
