GTR169 Electric Lock Manual
Rev 1
1
Electric Lock to Suit
Swing Gate Kits
GTR169
Electric locks are designed to secure your gate firmly in place and add extra security.
For dual gate installations we highly recommend using our
GTR164 gate stopper.
WARNING: Not Recommended for single or double gates with solid infill front panels in high wind areas
Important Information:
1. Before you install the Electric Lock please be sure the gate is level, moves freely, and does not bind or
block against barriers
2. For the Electric Lock to work correctly, the gate must close firmly engaging the lock catch against the
lock receiver.
3. The Electric Lock must be installed on the outside of the gate if the gate is
Push-to-Open
.
4. Due to the various mounting conditions , mounting hardware is not provided. Read this manual carefully
to determine the mounting hardware required for your condition.
5. For dual gate, the lock must be installed on the Master Gate (gate 1) which is near the Control Box, and
the lock receiver must be installed on the Slave Gate (gate 2).
(If the gate near the control box has been set up as slave gate, you can change the settings following
User's Manual for your gate automation kit)
Suits the Following Richmond Gate Motors:
GTR058, GTR062, GTR078, GTR099
