5
Rev 20A
Thank you for choosing this sliding gate opener. Please read the manual carefully before assembling and
using it. Do not leave out the manual if you send this product to a third party. This product complies with
the recognised technical standards and safety regulations. Our company has the right to change this
manual without prior notice.
General Safety:
Warning
: Incorrect or improper use of this product can cause damage to persons, animals or
properties.
•
Please ensure that the input voltage used matches with the supply voltage of gate opener (AC240V
50Hz).
•
All modifications to wiring or electrics, and any adjustment or maintenance to 240VAC
MUST
be done
by a qualified electrician.
•
To avoid damaging gas, power or other underground utility lines, contact the relevant authority
BEFORE digging.
•
All potential hazards and exposed pinch points of the gate must be eliminated or guarded prior to
installation of this gate motor.
•
Never mount any device that operates the gate motor where the user can reach over, under, around or
through the gate to operate the controls. These must be placed at least 1.8m from any moving part of
the moving gate.
•
Ensure power plug is disconnected from the power socket during installation or maintenance.
•
Keep remote control and other control devices ou
t of children’s reach, in order to avoid unintentional
activation.
•
Never allow anyone to hang onto the gate while moving.
•
Please ensure a warning sign provided is fitted to the structure.
•
To ensure safety, before installing the main motor, mount a Gate End Stop (GTR017) and a Gate Stopper
(GTR017 or GTR018) at each end of the rail to prevent the gate travelling off the track.
•
If required, install infrared photocells (GTR096, sold separately) to detect obstructions and prevent
injury or damage.
•
Instruct all users about the control systems provided and the manual opening operation in case of
emergency.
•
Ensure that the power cable is connected to a RCD protected weatherproof power outlet installed by a
qualified electrician.
•
Do not install the product in an explosive atmosphere or where there is any danger of flooding.
•
This product was exclusively designed and manufactured for the use specified in the present
documentation. Any other use not specified in this documentation could damage the product and be
dangerous.
•
Only use original parts for any maintenance or repair operation. Richmond Wheel & Castor Co declines
all responsibility with respect to the automation safety and correct operation when other supplier’s
components are used.
•
Do not modify the automation components, unless explicitly authorised by Richmond Wheel & Castor
Co.
•
The user must avoid any attempt to carry out any works or repairs on the motor, and should always
request the assistance of qualified personnel.
•
This motor is suitable for use on one sliding gate only.
•
Anything which is not expressly provided for in these instructions is not allowed and will void warranty.
•
Dispose of all packing materials (plastic, cardboard, polystyrene etc.) according to current guidelines.
Keep plastic bags and poly
styrene out of children’s reach.
Please save these instructions for future use.
