GTR057 Installation Manual:
Rev 2
11
Card and Pin Mode
To set user for Zone 1 ( 3 1 1 # )
To add a card and PIN user
(The PIN is any 4-6 digits between 0000-999999
except for 1234 which is reserved)
Add the card user Press
✱
to exit from the programming
mode then allocate the card a PIN as follows:
✱
Read card 1234# PIN# PIN#
To
change a PIN
in card and PIN mode (Method 1)
Note: this is done outside of programming mode so
a user can undertake this themselves.
✱
Read card Old PIN# New PIN# New PIN#
To
change a PIN
in card and PIN mode (Method 2)
Note: This is done outside of programming mode so
a user can undertake this themselves.
✱
User ID number# Old PIN# New PIN# New PIN#
To delete a
Card and PIN
user just delete the card
2 Read card # or 2 User ID #
To set users for Zone 2 ( 3 2 1 # ) the operation is the same as Zone 1
Card only Mode
(in this mode, users can only be valid by card)
To set Card user only
3 1 0 # , Zone 1
3 2 0 # , Zone 2
With this setting entry is by Card only
To delete
ALL users
Note: This is a dangerous option, so use with care
Delete al users of Zone 1: 2 0000 #
Delete all users of Zone 2: 9 0000 #
To unlock the door
(or change the relay state)
For a
PIN
user
Enter the PIN then press #
For a
Card
user
Read card
For a
Card and PIN
user
Read card then enter the PIN
