RichAuto S & T Co., Ltd
Add: 5th
floor, No.4 building, No 4. Yard, life Rd, life science park, beiqing St., changping district Beijing, China
Tel
：
010-53275118 Fax
：
010-53275110/53275111 Web site
59
Analysises and solutions
：
1
、
Pulse equivalent is wrong.
2
、
You does not select the right tool.
2.
The screen displays”beyond limit”when processing file
Analysises and solutions
：
1
、
The machine is not carried back to zero, the system is not able to confirm the
actual position. Make the machine back zero.
2
、
After setting the working origin, the reserved range is less than the actual file
size .Determine the actual file size and set correct working origin.
3
、
You set the wrong working origin in the file. Check the path of the file, and
re-export the correct file.
3.
Z axis
（
spindle
）
fall down abnormally
（
too fast
）
during processing
Analysises and solutions
：
1
、
Working speed beyond the fastest speed of Z axis. " Machine setup " - " Max
speed limit "
，
set the speed to the safe speed.
2
、
Coupling is loosing or transmission slippages. Re-adjustment the connecting
parts.
3
、
The lines connect the interface board with the motor drivers has
disruption. Re-adjust the lines.
4
、
Processing file error. Check processing file, try to download the correct
processing file to U disk or handle internal.
5
、
There is something wrong with the lines connectting Z axis motor and motor
driver. Replace the lines.
4.
Each time repeating the same processing file after backing to the machine
origin
，
Z axis depth is not the same
Analysises and solutions
：
1
、
Machining countertop is uneven or processing object not firmly fixed,
re-milling countertop adjust the flatness.
2
、
Z-axis origin detection switch repeat positioning accuracy error, causing each
Z axis homing error. Replace a high-quality detection switch.
3
、
Too much interference in the Z-axis homing process to form a false
origin. Re-adjust the line.
5.
Back to the origin
，
the machine can not stop
