RichAuto S & T Co., Ltd
Add: 5th
floor, No.4 building, No 4. Yard, life Rd, life science park, beiqing St., changping district Beijing, China
Tel
：
010-53275118 Fax
：
010-53275110/53275111 Web site
42
“
” and the bottom of screen will display what the current manual mode is.
1)
Continuous motion mode
This mode has no value control. In continuous mode, machine will follow when
press the direction button
、
、
、
、
、
.Its
motion speed is decided by current speed mode.
Note
: If uesers release the button immidiately after pressing the button(shorter
than 0.5s), machine will automatically move to the nearest grid point. It always stop
on grid point when the motion mode is over.Continous mode suitable for crude
regulation of machine coordinate situation.
2)
Step motion mode
This mode is always move in low speed, move 1 grid per 0.5 second. The grid
distance is decided by current speed mode. This motion mode is suitable for tool
adjusting or precise adjustment of the location of the mechanical coordinates.
3)
Distance motion mode
In this mode, it runs according to the setting of distance. Machine will move by
the set distance when user press direction button
、
、
、
、
、
.
Note
: Grid unable to affect the distance motion mode. Machine will move by
set distance, can’t move to grid
point. If user wants to change distance, please change
to distance mode and re-enter the distance value.
5.3.3
Manual testing input and output
In the initial boot interface, that is screen displays as follow:
1X 0.000 MAUN
1Y 0.000 F2
1Z 0.000 L SP
Continue
