Page4
Connect USB charge cable to USB-A (5V-2A) port (4) on power bank
Connect cable to your device
Press/release power ON/OFF switch (7)
Monitor charge via charge icon or LED on device
Backlit LCD shows remaining power bank capacity while charging devices
When device reaches 100%, remove cable
If cable is not removed, power bank will continue to safely trickle-charge device
Connect included USB charge cable (12) to any 5V/2A USB power source (not included)
Connect USB-C connector to USB-C input port (3) on power bank
LCD charge icon (6) on power bank will flash and show % of charge in power bank
Connect USB device to USB-A output port (4)
Monitor device’s charge status on its own screen or LED indicators
Device and power bank charge simultaneously
Press power ON (7) — LCD illuminates
Press/hold LED button (10) for 2 seconds – LED flashlight illuminates
Tap LED button (10) — LED SOS/strobe flashes
Tap LED button (10) — LED shuts off
Press power OFF (7) — LCD shuts off or shuts off automatically in 60 seconds
Note: When power bank is fully charged (LCD = 100%) — connected device continues to recharge. When device is fully charged, power bank
shuts off automatically.
Charge USB-C smartphones, tablets, etc. using included cable (12)
or use appropriate USB cable included with your device
Tandem charging
Built-in LED flashlight / SOS safety flasher
1
1
1
2
2
2
3
3
3
4
4
4
5
5
5
6
6
7
12000 mAh Portable Jump Starter / Air Pump / Power Bank
Model: TY001
Questions? Please email us at: [email protected]
2301 Kerner Blvd. Suite C, San Rafael, CA 94901, USA
www.RichardSolo.com
