Rice Lake TicketPress, Installation & Operation Manual

Page: 17 / 48

Printer Configuration 13
4.2.5 Toledo Interface
Toledo Mode
Off
XON/XOFF must be set to “OFF” during weight extraction when in Toledo Mode.
Note
The checksum must be disabled in the Toledo indicator.
Placement of text may not be identical to the Toledo positions.
A sample printout of the Toledo menu is shown below:
Figure 4-2. Toledo Ticket Example
4.2.6 Fairbanks Interface
Fairbanks iface
On/Off
4.2.7 Print Mode
Print Mode
Standard
Note
The TicketPress must be configured for “Weight Extraction” mode when connected to devices
sending data as continuous output.
Value Action
Off
*
No communication with Toledo indicators
On
Allows the
TicketPress
to communicate with Toledo indicators and format the weight information in both
standard and weight extraction modes.
The expected data format for Weight Extraction mode is as described in Print Mode, below.
Value Action
Off
*
No communication with Fairbanks indicators
On
Allows the
TicketPress
to communicate with Fairbanks indicators and format the weight information in both
standard and weight extraction modes.
The expected data format for Weight Extraction mode is as described in Print Mode, below.
Value Action
Standard
*
Data is printed as sent by the host device.
Weight
Extraction
The printer extracts weight, units, and status information from a predefined data input stream.
Please refer to “Weight Extraction” on page 23 for details.