Rice Lake SURVIVOR ATV series, Assembly Instructions Manual

Page: 10 / 22

6 ATV Portable Truck Scale Assembly Instructions
2.3 Scale Relocation
Use the following steps when relocating the ATV portable truck scale series truck scale.
1. Remove load cell cover plates.
Figure 2-9. Load Cell Cover Plate Removed
2. Remove hitch pin that holds stand in retracted position (see Figure 2-9).
3. Jack up each corner of module until hitch pin can be re-installed in shipping position.
4. Install bolt connecting stand to bulkhead base (see Figure 2-6 on page 5).
5. Install shipping bolts on end of modules (see Figure 2-5 on page 5).
6. Remove homerun cable and expansion cable.
7. Remove spacer tubes.
8. Remove backfill material.
9. Relocate modules starting with bridge module.
Chain
Pin
Load
Cell
Wiring