Rice Lake RL-22DT, Operation Manual

Page: 5 / 32

RL-22DT/42DT Operation Manual - Introduction 1
About This Manual
This manual is intended for use by qualified service
technicians responsible for installing and servicing the
RL-22DT/RL-42DT
printers.
Authorized distributors and their employees
can view or download this manual from the
Rice Lake Weighing Systems distributor
site at
www.ricelake.com
.
Danger of explosion if battery is incorrectly
replaced. Replace only with the equivalent
type recommended by the manufacturer.
Dispose of batteries according to the
manufacturer’s instructions.
1.0 Introduction
After unpacking, check to make sure all accessories are included:
• Barcode printer
• Power cord
• Switching power
• USB cable
• Label
1.1 Safety Instructions
• Keep the equipment away from humidity.
• Before you connect the equipment to the power outlet, check the voltage of the power source.
• Disconnect the equipment from the voltage of the power source to prevent possible transient
over-voltage damage.
• Don’t pour any liquid near the equipment, as it may result in electric shock.
• Only qualified service personnel should open the equipment.
• Don’t repair or adjust energized equipment alone under any circumstances. Someone capable of
providing first aid must always be present for your safety.
1.2 Printer Parts
Figure 1-1. Outside of printer
Warning
LED Light
Feed key
Power Switch
Cover Option
button