Rice Lake REVOLUTION 682 Synergy Plus, Technical Manual

Page: 38 / 130

682 Synergy Plus
30 Visit our website www.RiceLake.com
4.2 Main Menu
This section provides a flow chart and descriptions for the 682 top-level Main menu.
Figure 4-2. Main Menu
4.3 Audit Menu
This section provides a flow chart and descriptions for the Audit menu.
Figure 4-3. Audit Menu
Table 4-1. Main Menu Descriptions
Menu Description
Audit Displays the legally relevant firmware version and allows access to view/print audit trail information; see Section 4.3
User See Section 4.4 on page 31 for menu structure and parameter descriptions of the User menu
Setup See Section 4.5 on page 32 for menu structure and parameter descriptions of the Setup menu; only accessible when in Setup
mode by pressing the setup switch or if the audit jumper is in the ON position
Tare Displays and clears stored tare value; see Section 4.6 on page 53
MAC ID Displays the MAC addresses for Ethernet, Wi-Fi and Bluetooth® (read only)
Fieldbus Version Displays the installed Fieldbus card’s firmware version (read only); displays V0.00.00 if no Fieldbus card is installed
Version
Displays the installed firmware version number (read only)
Table 4-2. Audit Menu Descriptions
Parameter Description
Legally Relevant Version Legally relevant firmware version number (read only)
Calibration Counter
Displays total number of calibration events (read only)
Configuration Counter Displays total number of configuration events (read only)
Dump Audit Sends the audit parameters to the configured audit destination ports ( Section 4.5.6 on page 45 )
Audit Setup MAC ID User Tare
Fieldbus Version Version Audit
Audit User Version
Legally Relevant
Version
Calibration
Counter
Configuration
Counter
Dump Audit Dump Audit