Configuration
© Rice Lake Weighing Systems
●
All Rights Reserved
53
4.5.11 Softkey Menu
This section provides a flow chart and descriptions for the Softkey menu. Softkeys are configured to provide additional operator
functions. Configured softkeys are at the bottom of the display and are activated by the physical key directly below them. If six
or more softkeys are enabled, left and right arrows appear in the outside softkeys to allow navigation between available
softkeys. See
for softkey configuration procedure.
Figure 4-27. Softkey Menu
4.6 Tare Menu
This section provides a flow chart and descriptions for the Tare menu.
Figure 4-28. Tare Menu
Table 4-24. Softkey Menu Parameters
Parameter
Description
Softkey 1-15
Specifies the operator function assigned to each available softkey;
Settings:
None
(default), Blank, Time Date,
Display Tare, Display Accumulator, Setpoint, Batch Stop, Batch Start, Batch Pause, Batch Reset, Stop, Go,
Off, Display UID, Alibi, Weigh In, Weigh Out, Truck Regs, Auxiliary Format 1-4
Table 4-25. Tare Menu Parameters
Parameter
Description
Display Tare
Displays the current tare value (read only)
Clear Tare
Clears the current tare value
Softkey 1
Softkey 2-15
Softkey 15
Setup
Tare
User
Softkey
Analog Output
Default
Configuration
Display Tare
Clear Tare
Clear Tare
Tare
MAC ID
Setup
Summary of Contents for REVOLUTION 682 Synergy Plus
Page 129: ......
