Rice Lake REVOLUTION 682 Synergy Plus, Technical Manual

Page: 39 / 130

Configuration
© Rice Lake Weighing Systems ● All Rights Reserved 31
4.4 User Menu
This section provides a flow chart and descriptions for the User menu. The User menu and can be password protected. See
Section 3.4.22 on page 28 for the procedure to set a User menu password.
Figure 4-4. User Menu
4.4.1 Accumulator Menu
This section provides a flow chart and descriptions for the Accumulator menu.
Figure 4-5. Accumulator Menu
Table 4-3. User Menu Descriptions
Parameter Description
Calibration See Section 4.5.3 on page 35 for menu structure and parameter descriptions of the Calibration menu
Setpoint Displays the setpoint value of configured setpoints; Read only unless access parameter for the setpoint is set to ON;
menu is empty if no setpoints are configured; setpoints are fully configurable in the setup menu while the indicator is in
Setup mode
Accumulator Displays, prints and clears accumulated weight value; see Section 4.4.1
Time Displays the current set time; allows the time to be edited (24-hour) using the navigation keys and softkeys;
see Section 3.4.15 on page 24 for editing procedure
Date Displays the current set date; allows the date to be edited using the navigation keys and softkeys;
see Section 3.4.16 on page 25 for editing procedure
Table 4-4. Accumulator Menu Parameters
Parameter Description
Display Accumulator Displays the accumulator value (read only)
Print Accumulator
Prints the accumulator value to specified port, if setup
Clear Accumulator Clears the accumulator value
User Setup Audit
Calibration Setpoint Time Accumulator Date Date
Accumulator Time Setpoint
User Setup Audit
Display
Accumulator
Print Accumulator Clear Accumulator Clear Accumulator