Rice Lake REVOLUTION 682 Synergy Plus, Technical Manual

Page: 36 / 130

682 Synergy Plus
28 Visit our website www.RiceLake.com
3.4.21 Enter New Unit ID
Entering a new Unit ID requires access to Setup mode ( Section 4.1 on page 29 ).
1. Navigate to the Configuration menu within the Setup menu.
Configuration
displays.
2. Press or until
Program
displays.
3. Press .
Power Up Mode
displays.
4. Press or until
Unit ID
displays.
5. Press . The current unit ID value displays with the on-screen keyboard.
6. Edit the value using the alphanumeric entry procedure ( Section 3.3.2 on page 20 ).
7. Press
Cancel
softkey to exit without saving.
- Or -
Press
Save
softkey to save and exit when the value is correct.
Once back to the menu, press to return to Weigh mode.
3.4.22 Passwords
The User and Setup menus and can be password protected. See Section 1.3 on page 2 for a description of the User and Setup
modes and what menus are included in each. Use the follow procedure to configure passwords:
1. Navigate to the Configuration menu within the Setup menu.
Configuration
displays.
2. Press or until
Program
displays.
3. Press .
Power Up Mode
displays.
4. Press or until
Password
displays.
5. Press .
User
displays.
6. Press or to navigate to the desired password.
7. Press . The current password displays with the on-screen keyboard.
8. Edit the value using the alphanumeric entry procedure ( Section 3.3.2 on page 20 ).
9. Press
Cancel
softkey to exit without saving.
- Or -
Press
Save
softkey to save and exit when the value is correct.
10. Once back to the menu, press to return to Weigh mode.
3.4.23 Reset Configuration
Defaulting the 682 configuration requires access to Setup mode ( Section 4.1 on page 29 ).
1. Navigate to the Configuration menu within the Setup menu.
Configuration
displays.
2. Press .
Default Configuration
displays.
3. Press .
No
displays.
4. Press .
Yes
displays.
5. Press or to reset the configuration setting.
OK
displays.
6. Press twice to return to Weigh mode.