Rice Lake Ranger 1 Operation Manual Download Page 13

Product Specifications

9

5.0

Product Specifications 

Impedance:

Ranger 1:  700 ohms nominal

Ranger 3 & 5: 350 ohms nominal

Output Ranges:

Ranger 1:  0 to 3 mV/V continuously variable

Ranger 3 & 5: -0.5, 0, 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, and 4.5 mV/V

Vernier (Ranger 5 only):

Fine:

-0.02 to +0.5 mV/V of selected range

Medium:

-0.05 to +1.5 mV/V of selected range

Course:

-0.12 to +3.0 mV/V of selected range

Accuracy (Ranger 3 & 5):

+/-0.02% of selected range

Zero Offset (Ranger 3 & 5):

Ranger 1:  +0.005 mV/V Max

Ranger 3 & 5: +0.0005 mV/V Max

Normal Operating Temp:

14°F to 104°F (-10

C to + 40

C)

Temperature Coefficient:

Ranger 1:       100 ppm/ 

C

Ranger 3 & 5:   5 ppm/ 

C

Excitation Voltage:

15 VDC/AC Max

Unit Size:

3.5

W x 4.5

L x 2.2

D

Weight:

0.55 lb (Ranger 5)

Enclosure:

Flame retardant ABS plastic

Ranger 7

Load Impedance: 

Three settings by toggle switch. 

X0.5 =700 ohms

X1 = 350 ohms (1standard load cell)

X4= 87.5 ohms (4 load cell platform)

Output Range: 

0-3mV/V in .01mV/V steps (300 precision fixed steps)

Switchable Vernier: 

Two Ranges

Range 1 is equal to the 0.5mV/V switch plus 0 -0.5mV/V. 

Range 2 is equal to the 0.5mV/V switch plus the 0.1mV/V switch plus 0-0.1mV/V. Enabled by 

pressing the switch.

Switchable Offset: 

Off or switch setting ±25μV/V. Enabled by pressing the switch.

Accuracy: 

±0.01% + 1μV of selected range

Zero Setting: 

Position 

Zero

 returns the output to zero regardless of the switch settings. Offset setting remains 

constant (if enabled).

Zero Offset: 

±0.0005 mV/V

Initial Zero Offset:

 ±2μV

Normal Operating Temp: 

14°F to 104°F (-10°C to +40°C), accuracy specified at 23°C ±5°C

Temperature Coefficient: 

5ppm/°C

Excitation Voltage: 

3.5V to 12V unipolar. ±1.75 to ±6 Bipolar

LED Annunciators: 

EXC+ – normal Excitation Polarity.

EXC– – reverse Excitation Polarity. Both are on with AC Excitation.

OFFSET ON – the offset pot is enabled.

0.5mV/V – the variable pot is enabled with a range of 0 to 0.5mV/V plus the 0.5mV/V Rotary Switch 
setting.

0.1mV/V – the variable pot is enabled with a range of 0 to 0.1mV/V plus the 0.5mV/V and 0.1mV/V 
switch settings.

Binding Posts: 

Type 2758 (by Low Thermal Electronics Inc.) precision gold plated low thermal EMF 5-way binding 
posts for highest accuracy. Standard banana jacks at 0.75

 Pitch, or up to 14 AWG wire.

Summary of Contents for Ranger 1

















Reviews: