Introduction
1
About This Manual
This manual contains operating procedures for the DMC-782 coin counting scale and provides the user with all
the information necessary for setup and operation. It is organized based on the procedures you will likely follow
when setting up and using your coin counting scale. This manual applies to Version 1.00 of the DMC-782 coin
counting scale series.
This manual can be viewed or downloaded from the RLWS web site at
www.Ricelake.com
.
1.0
Introduction
The DMC-782 is a low cost coin counting scale that offers practical solutions for a full range of coin counting
applications. Its internal counting resolution of 1/500,000 gives you maximum counting precision and accuracy.
The backlit LCD display enables operators to easily see weights and quantities. The DMC-782 can also store a
coin value, tare weight, and unit weight for 23 of your coins, tokens or other items and recalls nine of them by
pressing a single pre-programmed key. When portability is required, choose the battery operation option of the
DMC-782 for over 380 hours of continuous use in mobile workstations, outdoor applications, and rental fleets.
The DMC-782 is rugged enough to operate reliably in many environments and withstand transport from one area
of the plant to another or from one business to the next.
1.1
Safety
Safety Signal Definitions:
CAUTION
Important
CAUTION
Indicates a potentially hazardous situation that, if not avoided, may result in minor to moderate injury.
Indicates information about procedures that, if not observed, could result in damage to equipment.
1.2
Safety Precautions
Do not operate or work on this equipment unless you have read and understand instructions in the
manual. Failure to follow the instructions or heed the warnings could result in injury or death. Contact
any Rice Lake Weighing Systems dealer for replacement manuals. Proper care is your responsibility.
Failure to follow the instructions or heed the warnings could result in minor to moderate injury.
• Some procedures described in this manual require work inside the scale base. These procedures are to be performed
by qualified service personnel only.
• DO NOT allow minors (children) or inexperienced persons to operate this unit.
• DO NOT use for purposes other than weight taking.
• DO NOT place fingers into slots or possible pinch points.
• DO NOT use any load-bearing component that is worn beyond 5% of the original dimension.
• DO NOT use this product if any of the components are cracked.
• DO NOT exceed the rated load limit of the unit.
• DO NOT make alterations or modifications to the unit.
• Do not drop the scale or subject it to violent shocks.
• For accurate weighing, the scale must be placed on a flat, stable surface.
• Operating voltages and frequencies other than specified could damage the equipment.
• Weight exceeding the maximum capacity may damage your scale.
