14
DMC-782 Operation Manual
3.2.2
Weight and Measurement Specifications (142 Settings)
To make changes to the Weight and Measurement Specifications, the span switch must be on. (For instructions
on how to turn the span switch on, see Section 4.0.)
1. To configure customer specifications, press and hold the
REZERO
key and enter
142
using the numeric
keypad. The first SPEC code is displayed.
The
VALUE/$
display shows what specification you are in (in this case, SPEC20). The
Denomination
display shows how this specification is currently programmed (Bit 3 = 0; Bit 2 = 0; Bit 1 = 0, and Bit 0 =
0), while the
Weight
display will show any changes you enter.
If this is the SPEC that you want to modify, enter the new setting from the numeric keypad and press the
* CONFIRM
key to enter the change into temporary memory and move to the next SPEC code.
2. Use the
+ (Plus)
and
–
(Minus) keys to scroll through the specifications until you find the one you want.
Then make your changes per the instructions in Step 1. Alternatively, you can go directly to a specific
specification by entering that specification’s number and pressing the
SHIFT
key (Example: 25 +
SHIFT
will bring up SPEC 25).
3. To change another SPEC code before exiting, repeat Steps 1 and 2.
4. To save all the changed SPEC settings currently in temporary memory and exit to the Weighing Mode,
press the
TARE
key.
Note
Once configuration is complete, power down the unit to exit out of configuration mode.
SPEC No.
Bit 3
Bit 2
Bit 1
Bit 0
20
Version display when
power on
0: Allow (DEFAULT)
1: Inhibit
Selection of
segment-check style
0: Fast (DEFAULT)
1: Standard
Start range
00: ±10% of Full Scale (DEFAULT)
01: ± 5% of Full Scale
10: ± 3% of Full Scale
11: ± 2% of Full Scale
21
Wight stability condition
00: Loose
01: Nornal (DEFAULT)
10: Tight
11: Stringent
IR mode protected by
span switch
0: No (DEFAULT)
1: Yes
Password setting
0: Allow
1: Inhibit (DEFAULT)
22
Decimal point position on weight display
00: No Decimal Point
01: 2nd Digit (0000.0)
10: 3rd Digit (000.00)
11: 4h Digit (00.000)
Minimum display
00: 1
01: 2
10: 5
11: 10
Table 3-2. DMC-782 Weight and Measurement Specifications
