14
DC-782 Operation Manual
3.2.2
Weight and Measurement Specifications (142 Settings)
To make changes to the Weight and Measurement Specifications, the span switch must be on. (For instructions
on how to turn the span switch on, see Section 4.0.)
1. To configure customer specifications, press and hold the
REZERO
key and enter
142
using the numeric
keypad. The first SPEC code is displayed.
The
Quantity
display shows what specification you are in (in this case, SPEC20). The
Weight
display
shows how this specification is currently programmed (Bit 3 = 1; Bit 2 = 0; Bit 1 = 0, and Bit 0 = 0),
while the
Unit Weight
display will show any changes you enter.
If this is the SPEC that you want to modify, enter the new setting from the numeric keypad and press the
* CONFIRM
key to enter the change into temporary memory and move to the next SPEC code.
2. Use the
+ (Plus)
and
–
(Minus) keys to scroll through the specifications until you find the one you want.
Then make your changes per the instructions in Step 1. Alternatively, you can go directly to a specific
specification by entering that specification’s number and pressing the # key (Example: 25 + # will bring
up SPEC 25).
07
Stop bit of RS-232C
0: 1 bit (DEFAULT)
1: 2 bit
Data length of RS-232C
0: 7 bits
1: 8 bits (DEFAULT)
Parity of RS-232C
00: None (DEFAULT)
01: Odd
10: Even
11: Not Used
08
Interval of Time-Out Error of RS-232C
00: 1 second
01: 3 seconds (DEFAULT)
10: 5 seconds
11: 10 seconds
Additional Parity Code in
Text of RS-232C
0: No (DEFAULT)
1: Yes
Status and Weight
Condition Flag in Text of
RS-232C
0: No (DEFAULT)
1: Yes
09
Tare Weight in Text of
RS-232C
0: No
1: Yes (DEFAULT)
Unit Weight in Text of
RS-232C
0: No
1: Yes (DEFAULT)
Quantity in Text of
RS-232C
0: No
1: Yes (DEFAULT)
Header Code in Text of
RS-232C
0: No
1: Yes (DEFAULT)
10
RS-232C PC Protocol
0000: Inhibit data transfer (DEFAULT)
0001: Standard Stream Type (Continuous Output)
0010: Standard Manual Type
0011: Standard Command Type
0100 ~ 1111: Not Used
11 ~ 19
Not Used (reserved for future use)
SPEC No.
Bit 3
Bit 2
Bit 1
Bit 0
Table 3-1. DC-782 (141) Settings
All manuals and user guides at all-guides.com
