Rice Lake DIGI DC-782, Operation Manual

Page: 17 / 43

Configuration Settings 13
If this is the SPEC that you want to modify, enter the new setting from the numeric keypad and press the
* CONFIRM
key to enter the change into temporary memory and move to the next SPEC code.
2. Use the
+
(plus) and
–
(minus) keys to scroll through the specifications until you find the one you want.
Then make your changes per the instructions in Step 1. Alternatively, you can go directly to a specific
specification by entering that specification’s number and pressing the # key (Example: 9 + # will bring
up SPEC 09; 11 + # will bring up SPEC 11).
3. To change another SPEC code before exiting, repeat Steps 1 and 2.
4. To save all the changed SPEC settings currently in temporary memory and exit to the Weighing Mode,
press the
TARE
key.
5. Turn off Power and restart the scale.
SPEC No. Bit 3 Bit 2 Bit 1 Bit 0
00 Auto Power-off Function (for no key operation and weighing operation)
0000: Auto power-off disable when scale is not in use (DEFAULT)
0001: 3 minutes
0010: 10 minutes
0011: 30 minutes
0100: 1 hour (DEFAULT0
0101: 3 hours
0110 ~ 1111 - not used
01 Buzzer
0: On (DEFAULT)
1: Off
Error Alarm
0: On (DEFAULT)
1: Off
Set Point Alarm
0: On (DEFAULT)
1: Off
Not Used
0: (DEFAULT)
02 Tare Override
0: Allow (DEFAULT)
1: Inhibit
Unit Weight Override
0: Allow(DEFAULT)
1: Inhibit
Zero Unit Weight Override
0: Allow (DEFAULT)
1: Inhibit
Not Used
0: (DEFAULT)
03 Back-Light Function
00: Auto (DEFAULT)
01: Always On
10: Always Off
11: Not Used
Auto Back-Light Function
00: 6 seconds (DEFAULT0
01: 15 seconds
10: Not Used
11: Not Used
04 Extent of Insufficient Samples
00: 0.1% (DEFAULT)
01: 0.2%
10: 0.0%
11: Not Used
Set Point Type
00: % quantity (DEFAULT)
01: % weight
10: Quantity
11: Weight
05 Sampling Time for Unit
Weight Calculation
0: 10 times
1: 5 times (DEFAULT)
Negative Counting
0: Allow (DEFAULT)
1: Inhibit
Re-Zero Function
0: Allow (DEFAULT)
1: Inhibit
Transmission Condition
of RS-232
0: Weight Stable
1: Unconditional (DEFAULT)
06 RTS/CTS Handshaking of
RS-232C
0: On
1: Off (DEFAULT)
Baud Rate of RS-232C
000: 1200 bps 100: 19200 bps
001: 2400 bps 101: 38400 bps
010: 4800 bps 110: Not used
011: 9600 bps (DEFAULT) 111: Not used
Table 3-1. DC-782 (141) Settings
All manuals and user guides at all-guides.com