MSI-3460 Challenger 3
32
www.RiceLake.com
7.1.1 Power
The Rugged Remote can be enabled to turn on and off the ScaleCore device it is paired remotely. The hold function must be
enabled in the MSI-3460 (
).
The Hold feature causes the device's modem to stay on and continuously draw from the battery, even when the
device is turned off, resulting in decreased battery life.
7.1.2 Zero
Press
to remove small deviations in zero when the Dyna-Link 2 is unloaded (
).
This key is not programmable.
7.1.3 Programmable Function Keys
and
are programmable in the MSI-3460.
is defaulted to Peak hold and
is defaulted to Test in the
MSI-3460. See
to configure the MSI-3460 function keys for Rugged Remote operation.
7.2 Conflict and Jamming Considerations
It is important to understand that only one transmitter at a time can be activated within a reception area. While the transmitted
signal consists of encoded digital data, only one carrier of any frequency can occupy airspace without conflict at any given time.
This is not to say that there cannot be multiple remote controls for the unit, but rather that two cannot be used simultaneously.
7.3 FCC Compliance
The Rugged Remote has 802.15.4 certification (
).
Note
