Configuration
©
Rice Lake Weighing Systems
●
All Rights Reserved
11
4.4 Programming Mode Menu
Various parameters can be set while in
Programming
mode.
Figure 4-3. Programming Mode Menu Structure
The following table lists the various display messages and sequence when setting up the scale.
Parameter
Description
Choices
Steps
FULL
Full capacity of the scale
Value (
capacity of
scale
)
The display toggles between a numeric value and
FULL
;
If you do not want to change the value, press the
BMI
key to move to the
next setting; Example: from FULL to LOAD. If you want to change the
value, use the following steps;
1.Press
ENTER
key to change value starting with the right most digit.
2.Use the Up/Down arrow keys to increment/decrement numbers.
3.Press
BMI
key to move to the left.
4.Use the Up/Down arrow keys to increment/decrement numbers.
5.Press
BMI
key again to move to the left
6.Use the Up/Down arrow keys to increment/decrement numbers.
7.When done press
ENTER
key to move to the next parameter (LOAD).
LOAD
This is the amount of weight applied during
calibration; Can also be changed in the
calibration menu
Value (200 lb)
The display toggles between a numeric value and
LOAD
;
If you do not want to change this value, press the
BMI
key to move to the
next setting; Example: from LOAD to ASTART; If you want to change the
value, use the following steps;
1.Press
ENTER
key to change value starting with the right most digit.
2.Use the Up/Down arrow keys to increment/decrement numbers.
3.Press
BMI
key to move to the left.
4.Use the Up/Down arrow keys to increment/decrement numbers.
5.When done, press
ENTER
key to move to next parameter (ASTART).
Table 4-1. Configuration Mode Menu
PROG
FULL
LOAD
G-CAL
G-LOC
ASTRT
ARW
SAL
ROUND
DISP
value
value
value
value
value
value
value
20.0
5.0
10.0
2.0
0.5
1.0
0.2
0.0
0.0000
00000
0.000
0.00
5
7
6
8
9
0
2
1
4
3
96
192
144
288
384
576
48
1152
BAUD
ATOL
ALEN
ATOUT
TOFF
SPACE
UNITS
OP
SAVE
value
value
value
value
PXX-X
LB/KG
LB
KG
