User manual
12
STORAGE
Ensure all pieces are clean and dry before storing. Store appliance in a dry, clean place.
Never wrap the cord tightly as this could place undue stress on the cord where it connects
to the appliance, causing it to fray and break. Keep it loosely coiled.
TROUBLESHOOTING GUIDE
PROBLEM
SOLUTION
The control panel does not light up when the
appliance is plugged.
-The control panel will light up only if the lid
is locked securely.
Make sure the lid is closed and locked
properly. If it is the case, make sure the power
cord is plugged and that the outlet is working.
A small quantity of liquid is leaking from the
appliance.
-All liquids must be added after the “Pasta”
or “Noodle” buttons have been pushed
Consult the “USING THE ELECTRIC PASTA
AND NOODLE MAKER“ section in this manual.
No pasta coming out of the appliance.
-The shaping disc is blocked.
Stop the program and unplug the appliance.
Unscrew the shaping disc support and
remove the disc. Clean and dry thoroughly the
disc before putting it back in the appliance.
Screw the shaping disc support and plug the
appliance. Launch the “Extrude“ program.
-The flour/liquid ratio is incorrect.
Study the consistency of the dough. If the
dough is too dry or too wet, consult the
“DOUGH CONSISTENCY” section of this
manual. Still if no pasta is coming out, stop
the program and unplug the appliance,
discard the dough. Clean the appliance.
Dry each part thoroughly. Start your recipe
again by measuring the ingredients precisely
as indicated in the chosen recipe. Restart
the pasta-making process by following the
instructions in this manual.
Summary of Contents for 63408
Page 2: ......
Page 20: ...18 Personal Notes...