15
User manual
2- HOW TO REMOVE / INSTALL THE BOTTOM CAP
::
:
To remove, rotate the black bottom cap left and pull downward.
::
:
To install, insert the cap back into the bottom of the stainless steel element cover aligning
the four tabs into the cover between the four dots around the bottom of the element cover.
Turn the cap right to securely lock in place.
3- CLEANING
::
:
WARNING
Unplug before cleaning.
::
:
NEVER IMMERSE the motor body, the control panel, the electrical cord or the plug in water or
any other liquid.
::
:
After use, remove the stainless steel element cover and rinse the internal parts (heating
element, temperature sensors and water circulator) under cold water. Let all pieces air dry.
::
:
If needed, the heating element and the water circulator can be cleaned in warm soapy water
with a soft toothbrush. Ensure to not immerse the motor body. Rinse and dry thoroughly.
::
:
Wipe motor body with a damp cloth and dry thoroughly.
::
:
The stainless steel element cover and the bottom cap are dishwasher safe.
NOTE:
Do not use abrasive cleaners or scouring pads or any other object that could scratch.
4- DECALCIFYING
After several uses, the heating element may be covered with mineral deposits from water. This
is normal and may occur more frequently depending on the minerals in the water used. Follow
below steps to clean minerals on the heating element.
::
:
Clamp the precision cooker to a heat proof container. Fill the container to the maximum line
(MAX) indicated on the stainless steel element cover with equal amounts of water and white
vinegar.
::
:
Plug the power cord. Set the target temperature to 70 °C / 158 °F and set timer for 20 minutes.
Press
button to start the appliance.
::
:
Once completed, unplug the power cord to turn off the appliance and let it cool down.
::
:
Discard the water from the container, rinse the element cover and the internal parts under cold
water. Dry thoroughly before storage.
Summary of Contents for 63406
Page 2: ......
