Page
11
/
19
V. OPERATION
5.1- Intended use
This worklight is intended for domestic use only. Do not use for artisanal, commercial,
professional and / or industrial use. It is designed for mobile illumination in a limited space and
for a limited time in indoor and outdoor areas and is not suitable for general room lighting.
5.2- Operation
Before use
•
Inspect the general condition of the worklight. Make sure it is not worn or damaged.
•
Make sure battery pack is sufficiently charged and properly installed.
After use
•
Clean the tool surface.
•
Remove the battery pack from the tool.
VI. MAINTENANCE AND STORAGE
WARNING!
Before any intervention on product, ensure that power is set to the “OFF” position
and the battery pack is removed.
Reminder: In order to maintain the machine in good working condition, carry out regular
maintenance of the machine after each use and before storage. Any breach or inadequate
maintenance reduces the life of the machine and increases the risk of breakdowns and accidents.
6.1- Cleaning
•
Before cleaning, turn off the tool and remove the battery pack.
•
Clean the tool with a dry clean cloth. Do not use water or detergent for cleaning.
•
Never immerse the tool in water or any liquids.
6.2- Storage
•
Clean the product and fully charge the battery pack before storage.
•
Keep product, instruction manual and accessories (if any) in the original packaging.
•
Store the product in a clean and dry environment, where is not freezing or too hot (exceed
50 ̊C).
•
Keep out of reach of children (e.g. lock it up).
6.3- Disposal
•
Do not dispose with household garbage. Do not throw into the environment.
•
Dispose of the product in a collecte centre for waste of electrical and electronic equipment,
or a waste drop-off centre; or seek advice from your local municipality.
•
Proceed with disposal of the tool, accessories and packaging according to local regulations
regarding the protection of the environment.
