IV. GETTING STARTED
Before any intervention on product, ensure that switch in set to “OFF” position.
4.1- Unpacking
Remove product from its packaging. Check that product and accessories are not damaged.
4.2- Assembly
Warning! Adjust the inclination so that the luminous flux does not disturb people.
- Select mounting location.
- It is recommended to mount the lamp permanently on a sturdy support where the solar panel can easily be
reached by direct sunlight.
Note : screwdriver and pencil not included.
Step
Mounting step
description
Illustration for PRLUMSOL1/M
Illustration for PRLUMSOL2/M
1
Use the template paper to
mark on the wall (or on
the mounting surface)
the holes to be drilled.
2
Drill the holes on the
marks on the wall using a
drill of appropriate
diameter.
Insert a plastic wall plug.
3
Insert and tighten the
screws making sure to
leave 2mm between the
wall and the screws
head.
4
Hang the solar lamp on
the screws’ head.
Page 17 / 21
