7
Using the white upper cog, manually roll the foil forward until the foil leader
has wound onto the take-up core and the colour of the transfer foil is fully
visible. Finally click down the printer head securely ensuring that both sides
lock down. You should hear two clicks.
With the head down wind the
upper cog to take- up the ten-
sion. If you have any small
creases use your thumb to
gently smooth these out.
Once you start printing it may
take a couple of short prints
to get perfect tension.
To remove a foil, follow the
instructions in reverse remov-
ing the take-up core 1
st
.
The “Plus” and “TT” printers
are designed to take foils up
to 92m lengths, we supply a 65m foil for the best balance between cost and
quality.
