CS-311S
Operation Manual
V1.2
Page 15 of 17
10. Trouble Shooting
During self-testing or machine working status, sometimes the LCD
screen may display following error code:
（
1
）
ERROR ADJUST
CHECK THE SENSOR 0
ERROR:
ADJUST
·When it display ERROR ADJUST, it means the signal of alloy sensor is
abnormal, the self-test can not be done normally, please contact your
local distributor for solution.
（
2
）
ERROR 01
CHECK THE SENSOR 1
ERROR:
01
·When it displays ERROR 01, it means the IR transistor is blocked,
please check the IR transistor and also the connecting cable. After the
problem is solved, please press CLR key to enter into main interface.
If the problem can not be solved, please contact your local distributor
for solution
.
Notes:
If there are any foreign things get jammed on the rail, the
dropped coins may not be counted, which will cause counting
mistake. Therefore, please clean all coins by moving foreign things
before sorting.
11. Precautions:
·Power line using the machine configuration.
·Unplug the power cord before moving the machine.
·Avoid operation under direct sunlight.
