CS-311S
Operation Manual
V1.2
Page 12 of 17
mode, the VALUE will flash. At this moment, you can change the value
of this channel through pressing numeric key 0 ~ 9. Press
CLRkey
，
the setted the value can be cleared to be 0
Notes: The value is already set in the factory and the function is
locked so the user can not change the value.
When one channel Value No. setting is finished, you can come
back to channel number selection interface by pressing SET key and
then repeat the above number setting way to set value number for
other target channels. After all settings are finished, press ESC key to
quit from VALUE submenu to come back into main menu interface.
(3)
SYSTEM
SYSTEM SET
5.MAGNET
4.PRINT
1.TIME
>
2.BUZZER
3.POINT
Firstly, it will enter into SYSTEM SET submenu, press
or
key to make
t
he cursor up and down. And then press SET key to enter
different setting interface.
1)TIME
>DATE
：
2013-08-29
TIME
：
05:44:32
Under this interface, if you need to update date and time, please
firstly press SET key to make the cursor blinking and then by press
key to make the cursor moving. Directly press 0~9 numeric key
to set your desired date and time. Press CLR key to clear data. After
all settings are finished, press ESC key to return to main menu
interface.
