RIB JOLLY ONE AA00200, Manual

Page: 26 / 40

26
G
B
ASSEMBLY ACCESSORIES
FLAT STRONG BOX
Safety box preventing the access to controlling devices.
Supplied as a standard, with toggle switch (open-close) and electric brake release system.
Of die-cast aluminium - IP54. code ACJ9071
PAIR OF HALF-SHELLS
Ø 42 => Ø 60 mm code ACJ9040
Ø 48 => Ø 60 mm code ACJ9050
PULLEY ADAPTER
Ø 200 => Ø 220 mm code ACJ9055
KEY SELECTORS
Control for any type of automation.
Equipped with two microswitches with N.O. contacts of 15A 250V (Open/Close) and one
switch with N.C. contact of 4A 250V (Stop).
The selector can be opened only with the operating key.
IP54
- EMBEDDED WITHOUT STOP dim.: 100x100x109 code ACG1010
- TO WALL WITHOUT STOP dim.: 100x100x42 code ACG1030
FLAT SURFACE MOUNTED PUSH BUTTON
OPEN/CLOSE
Control for any type of automation.
It is equipped with two microswitches with contacts 15A 250V.
Dim.: 59,5x82,5x29 code ACG2012
SPARK
In order to make the systems mentioned above give the best performances, you need
to install an antenna tuned on the frequency of the radio receiver installed.
N.B. Pay
attention to not let the central wire of the cable to came Into contact with the
external copper sheath, since this would prevent the antenna from working.
Install the antenna vertically and in such a way the remote control can reach it.
SPARK BLINKER WITH IN-BUILT INTERMITTENT CARD code ACG7059
LATERAL SUPPORT code ACG7042
SPARK ANTENNA 433 code ACG5452
FIT SLIM
PHOTOCELLS for the wall-installation code ACG8032
PAIR OF COLUMNS FOR FIT SLIM code ACG8065
FIT SLIM photocells have synchronism function in AC current and ranges of 20 m.
You can fit many photocell couples close together thanks to the optional synchronizing
circuit
SYNCRO TRANSMITTER TX SLIM SYNCRO code ACG8029 for more than 2
photocells couples (up to 4).
RADIO TRANSMITTER SUN
SUN 2CH code ACG6052 SUN 4CH code ACG6054
SUN CLONE 2CH code ACG6056 SUN CLONE 4CH code ACG6058