SATSPEEDBOX III R7920 Manual
Page 26
Show Statistics: click this button will pop-up windows to show
WDS AP Table
Site Survey
You must set the wireless to client mode first and connect to the ISP AP in Site-
Survey page.
WPS
WPS (Wi-Fi Protected Setup)
provides easy procedure to make network
connection between wireless station and wireless access point (vigor router) with the
encryption of WPA and WPA2.
Note: WPS only support in WPA/WPA2 mode
Disable WPS: select to disable WPS setting
Self-PIN Number: The Pin code of the Wireless router. When the client needs
to connect the wireless router WPS, it needs to enter the wireless router 8
digits PIN code to the client device in two minutes after the Wireless router
press the button to complete the connection.
Push Button Configuration: Click
Start PBC
to invoke Push-Button style WPS
setup procedure. The router will wait for WPS requests from wireless clients
about two minutes. The WLAN LED on the router will blink fast when WPS is in
progress. It will return to normal condition after two minutes, so you need to
setup WPS within two minutes.
