SATSPEEDBOX III R7920 Manual
Page 19
LAN Interface
The IP settings of the LAN (Local Area Network) interface for the device. These
settings may be referred to as "private settings". You may change the LAN IP
address if needed. The LAN IP address is private to your internal network and cannot
be seen on the Internet. The default IP address is 192.168.1.1 with a subnet mask of
255.255.255.0.
LAN is a network of computers or other devices that are in relatively close range of
each other. For example, devices in a house or office building would be considered
part of a local area network.
LAN IP Address: Assign the IP address of LAN server, default is 192.168.1.1
Subnet Mask: Select a subnet mask from the pull-down menu, default is
255.255.255.0.
DHCP Server Setting: DHCP stands for Dynamic Host Control Protocol. The
DHCP server gives out IP addresses when a device is starting up and request
an IP address to be logged on to the network. The device must be set as a
DHCP client to "Obtain the IP address automatically". By default, the DHCP
Server is enabled in the unit. The DHCP address pool contains the range of
the IP address that will automatically be assigned to the clients on the
network.
When you enable the DHCP server, DHCP Client Range: Enter the starting IP
address for the DHCP server’s IP assignment and the ending IP address for
the DHCP server’s IP assignment.
Client List
