RHYTHM M440-QXEZ, User Manual

Page: 15 / 20

Process of receiving radio waves
Receiving indication lamp
Reception fails
An radio wave is undetectable.
Please change an installation place.
Insert the batteries
and press the compulsory
receiving button.
Verifying
(illuminated)
Receiving
(flashing)
reception
completed
(OFF)
Press the receiving
check button.
(5 sec.)
Illuminated
(success)
(5 sec.)
Flashing
(failure)
Receiving indication lamp
１5
1.

Minimize the volume
If the volume is not turned
down, loud sounds may suddenly be output.
1.

Turn on the RADIO WAVE RECEPTION switch
2.

Remove the cover on the rear of the clock
3.

Insert batteries into the battery holders
4.

Press the COMPULSORY RECEIVING button
RECEIVING INDICATION lamp will turned on.
※ During reception, the hands will stop moving, but this is not a malfunction.
5.

Attach the pendulum
6.

Re-attach the cover
7.

Hanging the clock on the wall
For details to p.18.
8.

Please wait about 15 minutes to check the reception status
After the RECEIVING INDICATION lamp turns off, wait until the hands start moving.
＊ While waiting (or during reception), do not operate any buttons.
Press the receiving check button.
If reception was successful:
The INDICATION lamp will illuminate for 5 seconds. This completes the operation.
If reception failed:
The RECEIVING INDICATION lamp will flash for 5 seconds. For details to p.17.
Basic Operation